Indonesia Type Approval Microsoft Number Pad

Type Approval Microsoft Number Pad 1391

Microsoft 1391 Product Specification
For Bluetooth V2.0
*Frequency range: 2402~2480MHz, (ISM band Regulatory range:
2400~2483.5MHz)
*Channel spacing: 1MHz
*Channel List: 2402~2480 —- step 1MHz ( 79ch) (2402+KMHz K=0,1,2,…..78)
*Modulation type/technology: GFSK
*Data Rate: 1 Mbps ( No EDR function)
*Package Type : DH 1 / 3 /5
*Conducted output power(FCC) : 0 dBm
*EIRP power ( CE ): 2 dBm
*Antenna type: Printed Antenna.
*Antenna gain: 2 dBi

Indonesia Type Approval Microsoft Bluetooth Mobile Keyboard 6000

Indonesia Type approval Microsoft Bluetooth Mobile Keyboard 6000

Microsoft 1390 Product Specification
For Bluetooth V2.0
*Frequency range: 2402~2480MHz, (ISM band Regulatory range:
2400~2483.5MHz)
*Channel spacing: 1MHz
*Channel List: 2402~2480 —- step 1MHz ( 79ch) (2402+KMHz K=0,1,2,…..78)
*Modulation type/technology: GFSK
*Data Rate: 1 Mbps ( No EDR function)
*Package Type : DH 1 / 3 /5
*Conducted output power(FCC) : 0 dBm
*EIRP power ( CE ): 2 dBm
*Antenna type: Printed Antenna.
*Antenna gain: 2 dBi

Indonesia Type Approval Logitec 2.4GHz Cordless Keyboard

Indonesia Type Approval Logitec 2.4GHz Cordless Keyboard Y-R0010

Y-R0010 SPEC
Antenna Internal
Type of Antenna (Loop….) PCB printed
antenna gain ? dBi (ADT協助測試y)
Method of Frequency generation 16 MHz Crystal + PLL
frequency hopping or not
frequency hopping
not frequency hopping
Transmitter or transceiver transceiver
Number of channels 12
Carrier frequencies :
Index RF channel Index RF channel
1 2405(0x05) 7 2441 (0x29)
2 2408 (0x08) 8 2444 (0x2C)
3 2414 (0x0E) 9 2462 (0x3E)
4 2417 (0x11) 10 2465 (0x41)
5 2432 (0x20) 11 2471 (0x47)
6 2435 (0x23) 12 2474 (0x4A)
20dB channel bandwidth (Carson’s
rule) for modulated carrier
2 MHz @ -20 dBm
Modulation characteristics Digital GFSK
Transmitter aggregate data rate 2Mbits/s per second
Effective radiated power …. dBm
max with antenna assembly
2.5 dBm max
Chip set (model name, brand
name)
Model name: NRF24LE1
Brand name: Nordic
Can the transmitter operate
unmodulated?
Yes (in test mode only)
If intermittent duty duty cycle:
Tx on = 0.08 ms/ Tx off = 7.92ms
Duty cycle (Tx on / (Tx on + Tx off)) = 1%
PS: NCC 請依據實際量測
(其於國家以客戶宣告)
Transmission range 100m max in free space
Method of Frequency generation 16 MHz Crystal + PLL
Receiver operating Frequency range
in MHz
2405 MHz – 2474 MHz
Range 10m in free space
Power source AA*2 Alkaline battery
Power consumption 10mW typical (typing)
Nominal DC voltage 3V
Operating voltage 2.1V 3.2V
Extreme test voltage (low) 2.1V
Applies cut off voltage (automatic
switch off)
2.1V typ
DC maximum current 30 mA worst case
Extreme Temperature range 0 °C to 40°C

Indonesia Tipe approval Logitech cordless Mouse

Indoonesia Tipe approval Logitech cordless Mouse M-R0013

Product Specification
Product Name:2.4GHz Cordless Mouse
Model Name: M-R0013
Brand Name: Logitech
Number of channels 24 channels
Type of Modulation GFSK
Transmitter or Transceiver Transceiver
frequency hopping or not frequency
hopping
not frequency hopping
Channel switching frequency range 2405MHz to 2474MHz
Carrier frequencies
2405, 2408, 2411, 2414, 2417, 2420 ,2423,
2426, 2429, 2432, 2435, 2438, 2441, 2444,
2447, 2450, 2453, 2456, 2459, 2462, 2465,
2468, 2471, 2474
Channel bandwidth Typical of 2MHz
Modulation GFSK 2Mbps
Method of frequencies generation crystal + PLL
LO (TX) = channel frequency + 2MHz
LO (RX)= 8/7 x ( RX+2)
Data rate bit rate 1 Mbps
duty cycle Transmitter ON : 0.08 ms
Transmitter OFF : 7.92 ms
Then Duty cycle = ON/(ON+OFF) = 0.08 ms / 8
ms = 1 %
Transmitter modulation 0dB, Modulation: GFSK
Transmission range 30 foot typical, free space.
Antenna PCB printed antenna, meander quarter wave
Antenna Gain Antenna gain :-0.33 dBi
Effective radiated power: Power conducted –> 0 dBm
Antenna Type Printed meander line on PCB
Power source: 1 set of AA batteries
Nominal DC voltage 1.5V 50mA
operating voltage 1.1~1.6V
Extreme Temperature range 0°C to +40°C

Indonesia Type Approval Logitech Transciever

2.4GHz Logitech Transceiver C-U0006

Product Specification
Product Name:2.4GHz Transceiver
Model Name: C-U0006
Brand Name: Logitech
SPEC:
Type of Antenna PIFA: PCB Printed Inverted F Antenna
Antenna gain: 2.35 dBi
Effective radiated power . 0dBm
Method of Frequency generation 16 MHz Crystal + PLL
Operating Frequency range in MHz 2402 MHz – 2474 MHz
Number of channels 12
Carrier frequencies:
Index RF channel Index RF channel
1 5(0x05) 2405MHz 13 41 (0x29) 2441MHz
2 8 (0x08) 2408MHz 14 44 (0x2C) 2444MHz
4 14 (0x0E) 2414MHz 20 62 (0x3E) 2462MHz
5 17 (0x11) 2417MHz 21 65 (0x41) 2465MHz
10 32 (0x20) 2432MHz 23 71 (0x47) 2471MHz
11 35 (0x23) 2435MHz 24 74 (0x4A) 2474MHz
20dB channel bandwidth 2 MHz @ -20 dBm
Modulation characteristics Digital GFSK
Transmitter aggregate data rate 2Mbits per second (> 250 kbit/s)
If intermittent duty
duty cycle:
Tx on = 0.08 ms
Tx off = 7.92 ms
Duty cycle (Tx on / (Tx on + Tx off)) = 1 %
Method of Frequency generation 16 MHz Crystal + PLL
Power source USB port
Nominal DC voltage 5.0 V
Operating voltage 4.4 V to 5.25 V
DC maximum current 55 mA
Extreme Temperature range 0 °C to 40 °C

Global EMC Testing & Certification

Complying with EMC regulations is a critical issue when looking to launch your product anywher in the word with confidence.

Scope

  • Information technology Equipment
  • Telecomunication Equipment
  • Household application/Electric Tools/Electric Toys
  • Electrical Lighthing Equipment
  • Sound & TV Broadcast receivers
  • Railway system
  • Road trafic signal systems
  • Electrical Device for use in road vehicles and boats
  • Wirelles ( RF )/Telecom?Wimax Devices
  • etc

Item Test

  • Emmision : Conduction, Radiation, Current harmonics, Volatge Fluctuation & Flicker, disturbance Power, Click.
  • Immunity : ESD, RS, EFT, Surge, CS, PMF,Dip, Harmonics and Interharmonics

Region EMC Testing Standards

  • Taiwan : CNS 134338 ( ITE ), CNS 13439 ( AV ), CNS 13783-1 ( Home Appliance ), CNS 13803 ( ISM ), CNS 13804 ( Microwave Oven ), CNS 14115 ( Lighting ), CNS 14409 ( DTV EMS ), CNS 14972 ( DTV Performance )
  • USA : FCC Part 15B, FCC Part 18 ( ISM )
  • Canada : ICES-003 ( ITE ), BETS-7 ( TV )
  • AU/NZ : AS/NZS CISPR 11 ( ISM ), AS/NZS CISPR 13 ( AV ), AS/NZS CISPR 15 ( Lighting ), AS/NZS CISPR 22 ( ITE ), AS/NZS CISPR 14-1 ( HA )
  • Japan : J55013 ( AV, PSE ), V-3V-4 ( ITE, VCCI ), JEIDA-52 ( EMS )
  • Korea : KN11 ( ISM ), KN 13/KN 20 (AV ), KN 15 ( Lighthing ), KN 22/ 24 ( ITE )
  • China : GB 9254 ( ITE ), GB 13837 ( AV ), GB 17625 ( Harmonic )
  • Singapore : IDA TS EMC for Telecommunicatin Equipment
  • Rusia : GOST R51318.22 ( ITE EMI ), GOST R51318.24 ( ITE EMS )
  • EU : EN 300 386 ( Telecom network Equipment ),EN 301 489-1 ( Common requirements for radio EMC ), EN 301 489-3 ( SRD ), EN 301 489-4 ( Fixed Wimax ), EN 301 489-7 ( GSM and DCS ), EN 301 489-9 ( Wirelles Microphone ), EN 301 489-17 ( Wirelles LAN ), EN 301 489-19 ( GPS ), EN 301 489-24 ( WCDMA ), EN 50130-4 ( Alarm System ),EN 55011 ( ISM ), EN 55013/EN 55020 ( AV ), EN 55014-1/EN 55014-2 ( Home Appliance ), EN 55015/EN61547 ( Lighting ), EN55022/ EN 55024 (ITE )

REGULATION OF STANDARDIZATION in Indonesia

The standardization as a support element for the development had the important role in an Optimization effort
The efficient use of all resources and all development activity. Standardization equipment including
management and supervision really had a role in increasing the domestic and international trade,
the national industry development, as well as the protection against the user (the operator and the community)

the Goal of the standardization activity was the realisation of the quality guarantee. Therefore the standardization could be used as the implement of the government policy to organise the better economics structure and give the protection to the public.

The standardization also was used by the Government to support the achievement of the strategic aims including the increase in the export, the increase of the competitiveness of the domestic product against imports, and the increase of national efficiency.

The National Standardization System (SSN) was the foundation and the implementation guide of each standardization activity in Indonesia that must be pointed by all technical agencies in accordance with the Government Regulation No.15 in 1991 about the Indonesian National Standardization and the Decree of the President No.12 in 1991 about the Compilation, Implementation and Supervision of the Indonesian National Standardization. In the framework of realize the National Standardization System implementation, the development and implementation of the National Standardization System in the postal and telecommunications fields.

The standardization activity in the postal and telecommunications fields fully was handled by the technical agency, in this case was the DIRECTORATE GENERAL OF POST AND TELECOMMUNICATIONS that in this case was carried out by the Directorate  of the Standardization of Post and Telecommunications through the reconciliation of the Decree of the Minister of Communication No.KM.58 in 1998 about the Task Description of the Directorate General of Post and Telecommunications. And in the implementation, this standardization activity was carried out by the Directorate of Post and Telecommunications Standardization.

Sub-systems or the activities that each other was related one another in the National Standardization System consisted of the Standardization formulation, Standardization implementation, the management and the supervision of the standardization, the Standardization co-operation and information, metrology and accreditation.

The aim of the activity of the standardization of post and telecommunications was:   :

  • The Security towards Post and telecommunications network, that were national assets.
  • Guaranteed the inter-operability and inter-connectivity of the various equipment in the Post and telecommunications network.
  • Gave the opportunity for the emergence of the national manufacture industry.
  • Gave the protection for the users of the service (the operator and the community) of post and telecommunications.
  • Gave the national product opportunity to be competitive in the global market.

The formulation of the Directorate of Standardization of Post & Telecommunications.

Formulation of the Standardization of Telecommunications Equipment covered:

  • The Technical Condition.
  • The National Indonesian Standardization plan (SNI).
  • The Sectoral Sale Power.
  • Technical Agency that Initiate RSNI helped BSN in the Formulation of the Plan was meant.
  • The National Sale Power.

Technical Requirements :

.

Was technical conditions for equipment that referred to the International standardization (MIS.ITU, IEC/ISO, ETSI, etc.)

The SNI plan:

Was the plan that was compiled with the interested related agency to the achievement of the Consensus.

List of Equipment Technical Requirements SNI/KEPDIR/Post and Telecommunication equipment

NO. THE TITLE OF TECHNICAL REQUIREMENTS/STANDARDIZATION CODE NUMBER
1 SLMT Fibre Optic Cable for Application in the Air 70/DIRJEN/99
2 Smart-Card Public Telephone 57/DIRJEN/99
3 Digital Loop Carrier 58/DIRJEN/99
4 Telephone Data Voice Recorder (PDPT) 59/DIRJEN/99
5 CDMA Jarlokar Equipment (1895) 60/DIRJEN/99
6 Key Telephone System Equipment (KTS) 61/DIRJEN/99
7 PABX/ISDN 65/DIRJEN/99
8 PABX/STLO System Equipment 004/DIRJEN/99
9 Multy Coin Public Telephone 005/DIRJEN/99
10 Analog Telephone Set 006/DIRJEN/99
11 Rectifier Set 179/DIRJEN/98
12 NMT 450 Cellular Telephone Set Equipment 180/DIRJEN/98
13 GSM Cellular Telephone Set Equipment 181/DIRJEN/98
14 AMPS Cellular Telephone Set Equipment 182/DIRJEN/98
15 Radio Acces 44/DIRJEN/98
16 STBS CDMA 47/DIRJEN/98
17 Wireless LAN 58/DIRJEN/98
18 PHS System 138/DIRJEN/97
19 Technical Guidance for House Cable/Building Installation (IKR/G) 22/DIRJEN/96
20 Technical Guidance for House Cable Installation(IKR) 57/DIRJEN/96
21 Digital Telephone Central For 5000 Subsriber Capacity 258/DIRJEN/
22 Handheld/Portable Trunking 03/DIRJEN/96
23 TTKP (Cordless Telephone) 130/DIRJEN/95
24 Facsimile SNI 04-3508-1994
25 Modem Stand Alone SNI 04-3509-1994
26 Ground Cable T Cover, Issolated & Coated (PDPDLPE) SNI 04-3633-1994
27 Ottomate Telephone SNI 04-2021-1991
28 Copy Equipment for AM Channel SNI 04-2380/1991
29 Copy Equipment for FM Channel SNI-2381-1991
30 Digital Copy Equipment SNI 04-2382-1991
31 Teleprinter SNI 04-2009-1990
32 Ground Telephone Cable without Cover Isolated with PBB & BPBK Jelly SNI 04-2012-1990
33 Upper Ground Channel with the Steel Wire Hanger SNI 04-2066-1990
34 Ground Cable without cover and isolated with& BPBP SNI 04-2070-1990
35 Six Meters Iron Telephone Pole SNI 04-2072-1990
36 Seven Meters Iron Telephone Pole SNI 04-2073-1990
37 Nine Meters Iron Telephone Pole SNI 04-2075-1990
38 House Cable Isolated and Caoted with PVC SNI 04-2076-1990
39 House Telephone Cable covered with FB and Coated with PVC SNI 04-2077-1990
40 Box cable of BL Timah Putih, SNI 04-2081-1990
41 Three Cord Box Cable SNI 04-2091-1990
42 Coin Public Telephone Set (PTUMC) 89/POSTEL/90
43 VHF/UHF Radio with FM for Land Mobile Services 57/POSTEL/90
44 Frequeney Divisiom Multiplex Telegrap 72/POSTEL/90
45 Electronics Teleprinter Set 65/POSTEL/90
46 Akomex Set (Adaptor Computer-Telex) 66/POSTEL/90
47 Alcali Nikel Kadmium Batery Stasioner U Power Supply CC-D 53/POSTEL/90
48 Grounding System for Telecommunication Equipment 51/POSTEL/90
49 Cut Pipe and its completeness 43/POSTEL/90
50 Divider Box (KPD) 33/POSTEL/90
51 Under Ground Cable with Petrojelly 25/POSTEL/90
52 BTLTP House Cable Isolated and B.PVC 20/POSTEL/90
53 Ground Cable and Coated PBP 7/POSTEL/90
54 The Guidance of the Equipment Test Item for Radio Communication 007/DIRJEN/1999
55 The Technical condition of the Amateur Radio Equipment 80/DIRJEN/1999
56 The Technical condition of the SSB/HF Communication Broadcast Radio Equipment 84/DIRJEN/1999
57 The Technical condition of the Broadcast Radio Equipment 85/DIRJEN/1999
58 The Technical condition of the Public Non-Cable Telephone Equipment 86/DIRJEN/1999
59 The determining of the Use of the Frequency of Radio to                    The organization of Telecom Services for MSS Satellite 013/DIRJEN/1998

The implementation

The implementation of the Standardization was the activity of certification of the telecommunications equipment that was carried out to know the compatibility of the telecommunications equipment with the current technical condition.

The stages of the certification activities:
1. The condition inspection
2. Test
3. Evaluation
4. The publication of the Certificate

Control

The activity of the Control Sub-Directorate:

  • Socialised the standardization of Post and telecommunications
  • Carried out the evaluation of the implementation of the standardization of equipment and achievement of Post and telecommunications
  • Monitored and controlled the implementation of the Post standardization and control of telecommunications
  • The activity of the market inspection against postal and telecommunications equipment

The market inspection was carried out through the co-ordination of various related agencies like:

  • The Regional Office of the Department of communications in the region
  • The Directorate General of Bea and Cukai
  • Republic of Indonesia police
  • The Civil Servant’s investigation (PPNS)

Matters that was carried out in the Technical Co-operation of the Post and Telecommunications Standardization among other things are as follows:

  1. Studied and formulated the Co-operation material of Post and Telecommunications Standardization Technique with National and International Organisation.
  2. Evaluated the co-operation results in the field of Post and Telecommunications Standardization as well as proposed as the material to be studied to the National Standardization.
  3. Prepared the International decision results material to be maintained in accordance with the current regulation.
  4. Compiled session material and Indonesian Republic Delegation’s guide in the framework of participation in the International meeting in the field of post and telecommunications Standardization.
  5. Prepared the activity of the conference implementation, seminar or workshop in the field of post and telecommunications Standardization.
  6. Proposed the assignment of the officials who will attend the training, confirmation and meetings of the Technical Co-operation of the post and telecommunications Standardization in the National and International level.